[LeetCode] 476. Number Complement

轉自LeetCode

Given a positive integer, output its complement number. The complement strategy is to flip the bits of its binary representation.

Note:

1. The given integer is guaranteed to fit within the range of a 32-bit signed integer.
2. You could assume no leading zero bit in the integer’s binary representation.

Example 1:

Input: 5
Output: 2
Explanation: The binary representation of 5 is 101 (no leading zero bits), and its complement is 010. So you need to output 2.

Example 2:

Input: 1
Output: 0
Explanation: The binary representation of 1 is 1 (no leading zero bits), and its complement is 0. So you need to output 0.

<Solution>

[LeetCode] 475. Heaters

轉自LeetCode

Winter is coming! Your first job during the contest is to design a standard heater with fixed warm radius to warm all the houses.

Now, you are given positions of houses and heaters on a horizontal line, find out minimum radius of heaters so that all houses could be covered by those heaters.

So, your input will be the positions of houses and heaters seperately, and your expected output will be the minimum radius standard of heaters.

Note:

1. Numbers of houses and heaters you are given are non-negative and will not exceed 25000.
2. Positions of houses and heaters you are given are non-negative and will not exceed 10^9.
3. As long as a house is in the heaters' warm radius range, it can be warmed.
4. All the heaters follow your radius standard and the warm radius will the same.

Example 1:

Input: [1,2,3],[2]
Output: 1
Explanation: The only heater was placed in the position 2, and if we use the radius 1 standard, then all the houses can be warmed.

Example 2:

Input: [1,2,3,4],[1,4]
Output: 1
Explanation: The two heater was placed in the position 1 and 4. We need to use radius 1 standard, then all the houses can be warmed.

<Solution>

[LeetCode] 733. Flood Fill

轉自LeetCode

An image is represented by a 2-D array of integers, each integer representing the pixel value of the image (from 0 to 65535).

Given a coordinate (sr, sc) representing the starting pixel (row and column) of the flood fill, and a pixel value newColor, "flood fill" the image.

To perform a "flood fill", consider the starting pixel, plus any pixels connected 4-directionally to the starting pixel of the same color as the starting pixel, plus any pixels connected 4-directionally to those pixels (also with the same color as the starting pixel), and so on. Replace the color of all of the aforementioned pixels with the newColor.

At the end, return the modified image.

Example 1:

Input: 
image = [[1,1,1],[1,1,0],[1,0,1]]
sr = 1, sc = 1, newColor = 2
Output: [[2,2,2],[2,2,0],[2,0,1]]
Explanation: 
From the center of the image (with position (sr, sc) = (1, 1)), all pixels connected 
by a path of the same color as the starting pixel are colored with the new color.
Note the bottom corner is not colored 2, because it is not 4-directionally connected
to the starting pixel.

Note:

The length of image and image[0] will be in the range [1, 50].

The given starting pixel will satisfy 0 <= sr < image.length and 0 <= sc < image[0].length.

The value of each color in image[i][j] and newColor will be an integer in [0, 65535].

<Solution>

[LeetCode] 695. Max Area of Island

轉自LeetCode

Given a non-empty 2D array grid of 0's and 1's, an island is a group of 1's (representing land) connected 4-directionally (horizontal or vertical.) You may assume all four edges of the grid are surrounded by water.

Find the maximum area of an island in the given 2D array. (If there is no island, the maximum area is 0.)

Example 1:

[[0,0,1,0,0,0,0,1,0,0,0,0,0],
 [0,0,0,0,0,0,0,1,1,1,0,0,0],
 [0,1,1,0,1,0,0,0,0,0,0,0,0],
 [0,1,0,0,1,1,0,0,1,0,1,0,0],
 [0,1,0,0,1,1,0,0,1,1,1,0,0],
 [0,0,0,0,0,0,0,0,0,0,1,0,0],
 [0,0,0,0,0,0,0,1,1,1,0,0,0],
 [0,0,0,0,0,0,0,1,1,0,0,0,0]]

Given the above grid, return 6. Note the answer is not 11, because the island must be connected 4-directionally.

Example 2:

[[0,0,0,0,0,0,0,0]]

Given the above grid, return 0.

Note: The length of each dimension in the given grid does not exceed 50.

<Solution>

[LeetCode] 463. Island Perimeter

轉自LeetCode

You are given a map in form of a two-dimensional integer grid where 1 represents land and 0 represents water. Grid cells are connected horizontally/vertically (not diagonally). The grid is completely surrounded by water, and there is exactly one island (i.e., one or more connected land cells). The island doesn't have "lakes" (water inside that isn't connected to the water around the island). One cell is a square with side length 1. The grid is rectangular, width and height don't exceed 100. Determine the perimeter of the island.

Example:

[[0,1,0,0],
 [1,1,1,0],
 [0,1,0,0],
 [1,1,0,0]]

Answer: 16
Explanation: The perimeter is the 16 yellow stripes in the image below:

<Solution>

[LeetCode] 459. Repeated Substring Pattern

轉自LeetCode

Given a non-empty string check if it can be constructed by taking a substring of it and appending multiple copies of the substring together. You may assume the given string consists of lowercase English letters only and its length will not exceed 10000.

Example 1:

Input: "abab"

Output: True

Explanation: It's the substring "ab" twice.

Example 2:

Input: "aba"

Output: False

Example 3:

Input: "abcabcabcabc"

Output: True

Explanation: It's the substring "abc" four times. (And the substring "abcabc" twice.)

<Solution>

[LeetCode] 458. Poor Pigs

轉自LeetCode

There are 1000 buckets, one and only one of them contains poison, the rest are filled with water. They all look the same. If a pig drinks that poison it will die within 15 minutes. What is the minimum amount of pigs you need to figure out which bucket contains the poison within one hour.

Answer this question, and write an algorithm for the follow-up general case.

Follow-up:

If there are n buckets and a pig drinking poison will die within m minutes, how many pigs (x) you need to figure out the "poison" bucket within p minutes? There is exact one bucket with poison.

<Solution>

[LeetCode] 462. Minimum Moves to Equal Array Elements II

轉自LeetCode

Given a non-empty integer array, find the minimum number of moves required to make all array elements equal, where a move is incrementing a selected element by 1 or decrementing a selected element by 1.

You may assume the array's length is at most 10,000.

<Solution>

[LeetCode] 455. Assign Cookies

轉自LeetCode

Assume you are an awesome parent and want to give your children some cookies. But, you should give each child at most one cookie. Each child i has a greed factor gi, which is the minimum size of a cookie that the child will be content with; and each cookie j has a size sj. If sj >= gi, we can assign the cookie j to the child i, and the child i will be content. Your goal is to maximize the number of your content children and output the maximum number.

Note:
You may assume the greed factor is always positive.
You cannot assign more than one cookie to one child.

Example 1:

Input: [1,2,3], [1,1]

Output: 1

Explanation: You have 3 children and 2 cookies. The greed factors of 3 children are 1, 2, 3. 
And even though you have 2 cookies, since their size is both 1, you could only make the child whose greed factor is 1 content.
You need to output 1.

Example 2:

Input: [1,2], [1,2,3]

Output: 2

Explanation: You have 2 children and 3 cookies. The greed factors of 2 children are 1, 2. 
You have 3 cookies and their sizes are big enough to gratify all of the children, 
You need to output 2.

<Solution>

[LeetCode] 442. Find All Duplicates in an Array

轉自LeetCode

Given an array of integers, 1 ≤ a[i] ≤ n (n = size of array), some elements appear twice and others appear once.

Find all the elements that appear twice in this array.

Could you do it without extra space and in O(n) runtime?

Example:

Input:
[4,3,2,7,8,2,3,1]

Output:
[2,3]

<Solution>

[LeetCode] 448. Find All Numbers Disappeared in an Array

轉自LeetCode

Given an array of integers where 1 ≤ a[i] ≤ n (n = size of array), some elements appear twice and others appear once.

Find all the elements of [1, n] inclusive that do not appear in this array.

Could you do it without extra space and in O(n) runtime? You may assume the returned list does not count as extra space.

Example:

Input:
[4,3,2,7,8,2,3,1]

Output:
[5,6]

<Solution>